Letter from Flint Group

Swatches of blue on blue background

This letter provides information concerning Flint Group’s dedication to providing the printing industry with inks that minimize any negative impact on the environment. It also serves as an educational reference to assist printers who receive requests from their customers.

Flint Group has a proud history of being an environmentally responsible organization throughout our global manufacturing sites and with the products we supply.

Prior to any substantive discussion about use of the terms ‘environmentally friendly,’ or ‘renewable resources,’ it is important to gain an understanding of the materials that make up a Heatset ink and their effect on print performance and/or print quality.

Heatset Ink Ingredients

The constituents of a Heatset ink can be broken into the following categories:

  1. Colorant
  2. Vehicle
  3. Additives

Colorant: The colorants used in four-color process printing are primarily Copper Phthalocyanine Blue, Lithol Rubine, Diarylide Yellow and Carbon Black. The three non-black colorants are all organic pigments and are produced by reacting organic chemicals derived from either crude oil or natural gas. The carbon used for the black ink is made by burning oil and natural gas in an oxygen-deficient atmosphere.

Vehicle: The Heatset vehicle, used to transport and fix the pigment to the paper, is made up of hard resin, hydrocarbon resin, vegetable oil alkyd and middle distillate. The mixture of resins, alkyd and distillate is heated and stirred until the resin melts into a solution. After cooling, the resulting vehicle (or varnish) is either mixed with the pigment and passed through grinding equipment or used in a pigment “flushing” process that produces a concentrated colorant base for use in ink manufacture.

The hard resins are produced from tall oil rosin or gum rosin. Tall oil rosin is a byproduct of the paper making industry. Gum rosin is harvested from live trees.

Additives: The major additives used in Heatset inks are waxes. These are used to promote rub resistance and slip during finishing and binding of the printed product.

Heatset Ink Drying Mechanism

A Heatset ink film dries by removing the middle distillate. This is most commonly performed by subjecting the ink film to high-velocity hot air. The heated air removes the middle distillate causing the viscosity of the ink film to rise sharply to a point at which it acts as a solid. Only volatile ingredients in the ink are removed and these are primarily distillates of varying boiling ranges. Any non-volatile liquid ingredients, such as vegetable oils, remain in the ink film and decrease the film’s hardness. Too much of these oils can result in an inability to dry the ink film adequately, no matter how much heat or air velocity is applied.

Vegetable Oils

Heatset inks have always contained some vegetable oil. The vegetable oil is used to produce alkyds that are used in the pigment grinding process due to their excellent wetting properties. The most common vegetable oil used in Heatset inks up until the 1990s was linseed oil.

During the 1990s, the American Soybean Association (ASA) promoted soybean oil for use in all types of oil-based inks. As lobbyists for soybean growers, their objective was to find ways to increase the demand for all types of soy products. After initially setting soy targets that were technically unfeasible for Heatset inks, the ASA surveyed technical experts. As a result, the ASA now requires any given Heatset ink to carry a minimum of seven percent soybean oil in order to qualify for the “Printed with Soy Ink” seal. 1 Incorporating soy oils into printing inks was deemed such a success that the National Soy Ink Information Center has been discontinued.

The logo shown here is still used today to identify inks that contain the qualifying percentages of soy oil.

 

Printed with Bio Renewable Ink Logo Today, Heatset inks usually contain a mixture of vegetable oils to obtain the beneficial properties of each of these oils. Other ecologically focused programs, such as the Biorenewable Certification Labeling Program managed by the National Association of Printing Ink Manufacturers (NAPIM) tracks overall bio-renewable content, soy or otherwise.

Renewable Resources

The most common renewable resources used in Heatset inks are soybean oil, linseed oil, castor oil, tall oil rosin and gum rosin.

The amount of renewable resources that can be incorporated into a Heatset ink formula is limited by the hardness of ink film required to travel through the steps necessary to complete the print job without marking or smearing the printed piece. The amount of ink absorption into the paper can also affect the drying of the ink. Generally, the more the ink is absorbed into the paper, the greater the percentage of vegetable oil that can be used in the ink formula.

The Heatset Inks manufactured by Flint Group for Cummings Printing contains the following percentages of renewable resources:

Renewable Recourse Graph

1 For printers who wish to use the “Printed with Soy Ink” seal on printed materials or for promotional use: As of 2012, it no longer suffices for the ink supplier alone to sign a licensing agreement with the ASA. The printer, too, must sign a licensing agreement with the ASA. Flint Group does have a signed licensing agreement.

Conclusion

Heatset inks have always contained renewable resources but the amount that can be incorporated into the ink formula depends upon many variables in the printing process. These variables include paper type, finishing equipment, end use of the printed piece, ink strength and more.

Due to the drying mechanism used in Heatset printing and the fact that inks must be oil-based to interact appropriately with the fountain solution, the use of petroleum-based products as an ingredient in the formulation of inks is necessary at this time for Heatset printing. However, Flint Group continually analyzes opportunities to decrease our dependency on petroleum-based products and will continue to find new and innovative ways to incorporate renewable or recyclable materials into our Heatset inks.

Flint Group’s Agri-Web™ Logo

To address the increasing desires of print buyers to specify printed products that are more environmentally friendly, Flint Group is providing this communication and a means to identify inks that qualify as such. The Agri-Web™ logo assures print specifiers that although the inks may not use the required percentage of soy oil to merit use of the soy seal, they use a combination and level of resources that are no less renewable while ensuring optimal on-press performance.

The Flint Group Heatset ink provided qualifies for the Soy and Agri-Web™ label since it contains the previously mentioned renewable oils and rosins in much greater percentages than would be possible with soy oil alone.

Your local Flint Group representative will be happy to assist with any questions or customer inquiries about all printing ink types and renewable resources.

Contact Us Today

Our commitment to quality and customer service makes us the perfect choice for all your printing needs. Don’t hesitate to reach out to our team today to learn more about our magazine printing services. We cannot wait to create with you!

More to Explore